How to Attach Trekking Pole to Backpack: Quick Tips!

How to attach trekking pole to backpack? Look for the pole loops or elastic cords and fasten the poles to your backpack. Make sure that the tips are facing down and the grips can be reached. If you are an outdoor enthusiast trekking poles shall definitely be on your list as it provides stability and support for walking over variable hard ground. However, ensure you know how to correctly attach them onto your backpack if and when not using the trekking pole is required. Chances are, any modern backpack will have one or more dedicated loops/ lash points/ elastic cords that will allow you to do this easily. These features make the poles easily accessible when you need them while still keeping them securely attached to your pack whilst traveling. By properly securing your trekking poles, you will not only be protecting them and your backpack, but you are also ensuring they won’t get tangled in vegetation causing others to trip or unsafe situations. Over time this guide will assist you in distilling that process into one that becomes 2nd nature as a part of your preparation routine for the outdoors.

Why Attach Trekking Pole To Backpack

If you’re a hiker, you may be wondering why the heck we attached our trekking poles to the backpack at all. The answer is simple. Hands-free is the way to be on the trails! Some paths, after all, are ones that every hand must play. Or maybe, just maybe, you have earned yourself a rest and there is no need for the poles. This is another situation where it becomes very practical to attach trekking poles to a backpack. But the advantage it offers is one of tactical hiking, not just easy access.

Benefits Of Attaching Trekking Pole To Backpack

The big benefits of attaching your trekking poles to a backpack are obvious:

• Easy Access: Poles hang from your wrist, making them easily accessible when needed again;
• Better Balance: A backpack that with poles attached is far steadier when set down;
• Hands-Free: While climbing, eating or setting a route keep your gear organized;
• Loss Prevention: Avoid poles in the lodge lost and left behind;

Types Of Backpacks Suitable For Attaching Trekking Pole

Any backpack won’t do for this task. Here’s what works best:

Type of Backpack	Attachment Feature
Hiking Backpacks	Built-in loops and straps for poles
Daypacks	Some come with elastic bands or external loops
Hydration Packs	Often have special clips for poles
Technical Packs	Feature dedicated tool loops and shock cords

Preparing The Trekking Pole

One useful note and tip for anything hitting the trails, be sure to get your trekking poles set up. With the right adjustments and well attached poles you can have an easy or comfortable hike whenever required. Here are the steps you’ll need to complete in order to get your trekking poles backpack-ready!

Adjusting The Trekking Pole

Adjust your trekking poles to the correct height. Your elbows should be at 90 degrees when you grasp the poles with tips on the ground. This yellow girl is sitting in a position where it doesn’t make arms tiring and keep balance as well.

1. Unlock the pole’s mechanism;
2. Extend the sections to reach your height;
3. Simply lock the sections back in place;

Collapsing The Trekking Pole

Simply collapse your poles and attach it to your backpack. Easy as pie! Besides catching on branches and being awkward to carry.

• Unlock each section;
• Press or slide any portion of the sub-section until standing flat;
• Lock it and ready to go;

Securing The Trekking Pole

Not all backpacks are designed with these loops or straps. Use these to prevent your poles from moving while you walk.

Step	Action
1	Locate the loop or strap on your backpack.
2	Insert the collapsed poles through the loops.
3	Tighten the straps to secure the poles.

Attaching The Trekking Pole To Backpack

After this, you are ready to go out on the trails and it is a fact that how do you attach trekking pole to backpack. Your hands are now free to make the trip carrying your poles super easy So, to attach your trekking poles securely you need to follow these simple steps.

Locating The Attachment Points On The Backpack

Locate the attachment points on your backpack. Such loops or straps are nothing but special ones where you can keep your trekking poles. Nearly all hiking backpacks have these, and they are usually in a couple of places, either on the sides or front of the pack.

Inserting The Trekking Pole In The Attachment Points

With my attachment points I identified, shove the tip of your trekking pole into that lower loop/strap as shown below. Note that the grip end should be pointing upward.

Securing The Trekking Pole To The Attachment Points

After inserting the pole, Securitize it. Loop the upper strap of your backpack around the shaft below where you’ve been holding at the grip, if applicable. As you walk, tighten it up so that the pole feels secure and doesn’t flop around.

If your backpack happens to use a different system, whether it be a bungee cord or clasp, simply follow those mechanisms in order to secure the pole. Just make sure you always double check that the pole are properly attached before setting out on your hike! Rest assured that any time you set your trekking poles down, they won’t go flying off on their own.

Testing And Adjusting The Attachment

Always leave your trekking poles attached to your pack until you have tested or adjusted. so, your gear feels secure and comfortable. Now let’s go through the steps to get your trekking pole attachment perfect.

Testing The Stability Of The Attachment

To start, gently shake your backpack. Observe how the poles move. They should move around gently. If the hips shift or slide, more adjustments will have to be made. Listen one more time if the poles are rattling or making noise Yet, if it does wiggle freely side to side or up and down, look into tightening the straps or better yet adding a little more padding.

Adjusting The Attachment For Comfort

Comfort is key on any hike. Just make sure the poles are not digging into your back or throwing the pack off balance. Make sure to adjust your straps! An improperly fitted bag will not only sag and cause you discomfort but won’t allow the weight of it to distribute evenly. Trust me, I’ve made the mistake before so take my word for it. Straps snug, but not too tight. Allowing you to completely concentrate on working your back as opposed to mainly stressing your shoulders and spine.

• Slightly loosen the straps if your backpack feels as though it’s pulling back;
• Just tighten them up if the poles wobble;
• Reposition the poles so that there are no pressure points;

Making Sure The Trekking Pole Is Easy To Access

Make sure your trekking poles are easily accessible too. Test the ease of access. In theory you should easily be able to reach back and unclip the poles If not then move your poles further down towards the edge of the pack, or make the straps longer. Make sure the clip mechanism is easy to connect and disconnect.

Step	Action	Check
1	Shake the backpack	Poles are stable
2	Adjust straps	Backpack is comfortable
3	Access poles	Poles are reachable

Conclusion

It’s easy enough to secure your trekking poles to the back of your backpack. Well, as long as you’ve got the right loops, straps or clips to keep it in place when transporting that is. “A shaft that’s joined legitimately not as it were liberates up your hands but too keeps those edges from pounding against the tops of trains,” it exhorted. Follow these simple tips and you’ll cruise along on your next walk in no time.

Related Articles:

• Best Budget Trekking Poles
• How Tall Should Trekking Pole Be
• Best Camping Chairs for Bad Back

FAQs